Contact us: +44 (0) 1942 671122

Contact us: +44 (0) 1942 671122


Site search by Findberry

We offer a range of rotary wall mounted panel LED controllers with a choice of control options designed to be easily mounted into a standard single gang wall plate. Controllers are supported with a range of LED drivers and decoders in constant voltage and constant current outputs.

K1 RF LED Controller

The K1 rotary panel dimmer is designed to drive LED strips and clusters by wireless RF signal. The dimmer offers single colour brightness and CT control with built in push on/off switch and is easily mounted using the magnetic rear cover.

  • Battery powered 3v (CR2032) included
  • Wireless RF 2.4GHz control
  • Magnetic rear cover for easy mounting
  • Brightness and CT control
  • Wireless range up to 30 metres
  • Pairs with FUT-035 and FUT-036 RF receiver/drivers
  • 86x86x27mm

K1 PDF 

 

E6-TD1 AC Mains

The E6-TD1 mains rotary panel dimmer is designed to control LED strips and clusters by AC mains triac drivers. The dimmer has built in power switch and is easily mounted into a standard single gang wall plate.

  • AC mains input 220-240VAC
  • leading edge triac control
  • Hard Wired connection via terminal block
  • Incandescent lamp: 25-500W
  • High-voltage halogen lamp: 25-500W
  • Dimming LEDs: 6-300W
  • compatible with triac LED drivers

E6-TD1 PDF 

 

EX61 DMX512

The EX61 is a wireless rotary panel LED dimmer designed to drive LED strips and clusters via RF or wired DMX signal. May be used in conjunction with RF receiver drivers F4-5A and F4-CC and DMX512 decoder drivers. Control also via F1 hand-held remote control.

  • AC mains input 100-240VAC
  • Hard wired DMX512
  • Compatible with L-Bus system
  • Wireless RF 2.4Ghz
  • Communicate with WiFi gateway
  • Single channel
  • 30 metre transmission distance
  • Control also via F1 hand-held remote control

EX61 PDF 

E6-DA1 DALI

The E6-DALI rotary panel dimmer is designed to drive LED strips and clusters via DALI signal. The dimmer has built in power switch and is easily mounted into a standard single gang wall plate.

  • DALI Power supply
  • Single channel DALI
  • Adopts DALI standard protocol IEC62386
  • Compatible with DALI constant voltage drivers
  • Compatible with DALI constant current crivers

E6-DA1 PDF 

 

E610P-RF 0-10V

The E610P-RF is a rotary panel LED dimmer module with RF control designed to drive LED strips and clusters via 0/1-10v dimmer drivers. The dimmer has built in power switch and is easily mounted into a standard single gang wall plate.

  • AC mains input 100-240VAC
  • RF 2.4Ghz remote control
  • Output 0-10v 50mA
  • Single channel
  • Compatible with WiFi gateway
  • Use in conjunction with F1 Hand-held remote

E610P-RF PDF 

E610-P 0-10V

The E610-P is a rotary panel 0-10v dimmer module designed to drive LED strips and fittings via 0/1-10v dimmer drivers. 
The dimmer has built in power switch and is easily mounted into a standard single gang wall plate.

  • AC mains input 100-240VAC
  • Output 0-10v 50mA
  • Single channel
  • Compatible with 0-10v dimmer drivers

E610-P Series PDF 

BC-K3-RGB

The BC-K3-RGB rotary panel LED controller is designed to drive full colour LED lamps and fittings via hard wired 3-channel constant voltage output.

  • Low voltage 12-24VDC
  • 3 channel 4A/ch
  • 3-channel RGB control
  • Hard wire to lamps & drivers
  • Load power max 288W

BC-K3-RGB PDF 

BC-K2-CT

The BC-K2-CT rotary panel LED controller is designed to drive 2-channel White colour temperature LED lamps and fittings via hard wired 3-channel constant voltage output.

  • Low voltage 12-24VDC
  • 2 channel 4A/ch
  • 2-channel CT control
  • Hard wire to lamps & drivers
  • Load power max 192W