Contact us: +44 (0) 1942 671122
Contact us: +44 (0) 1942 671122
Contact us: +44 (0) 1942 671122
Contact us: +44 (0) 1942 671122
We offer a range of motion sensors designed to be built-in to luminaires designed to maximise lighting control using automatic on/off switching of AC mains supply or low voltage DC output. Options include sensor dimming, wireless RF and ambient light detection.
The Philips EasyAir Master connect SNHB210 is designed to be used in conjunction with Philips sensor ready LED drivers. The sensor combines occupancy sensing, daylight harvesting and task tuning in a single package and operates with the established D4i open standard digital interface to make a simple two-wire connection between sensor and driver.
Motion may be detected by microwave signals through glass and thin materials (except metal). The switching may be set at a lux level to ensure that luminaires are only illuminated in dusk or dark conditions. Control such as On times, delay times and detection range may be set via DIP switch. Loads up to 800W resistive may be connected.
The HC018V microwave motion detectors offers 1-10V dimming when no presence is detected. The switching may be set at a lux level to ensure that luminaires are only illuminated in dusk or dark conditions. A choice of control adjustments are available such as On times, delay times and detection range, set via DIP switch. Loads up to 2000W resistive may be connected.
SOL-PIR is a pyroelectric human body induction control product for sensing and control. The input PIR sensor controls the constant voltage 12-24 V output. Applications include corridor lighting.
Our range of motion sensors extends to RF microwave types using a master and slave configuration for remote and group sensing.
Using 868MHz RF technology to realise wireless group networking the narrow frequency avoids multi-channel interference. 32 different frequency channels are available for flexibilty of installation adopting advanced code detection. In addition there is a manual push function for on-off and dimming. Long RF transmitting distance up to 50m indoor.
The MS01 daylight sensor provides a simple and effective solution for daylight harvesting by direct connection to 1-10V interface. The operating voltage is 1~10Vdc with a max current sink of 50mA. The ambient light level may be adjusted for switching levels. For connection the cable length is80cm. Use in conjunction with our 1-10v dimmable LED drivers and sensors.